MATERIALS

Pain de Mousse 6'4" Shortboard XTRAFOAM

Pain de Mousse 6'8" Shortboard XTRAFOAM

Pain de Mousse 6'11" Shortboard XTRAFOAM

Pain de Mousse 6'5" Fish XTRAFOAM

Pain de Mousse 6'11" Fish XTRAFOAM

Pain de Mousse 7'2" Malibu XTRAFOAM

Pain de Mousse 7'10" Malibu XTRAFOAM

Pain de Mousse 8'5" Malibu XTRAFOAM

Pain de Mousse XTRAFOAM 9'5" en mousse polyuréthane (PU) pour la réalisation d'une planche de type longboard.

La mousse XTRAFOAM est facile à travailler et permet de réaliser des planches légères.
La latte est en contreplaqué 9mm

Pain de Mousse XTRAFOAM 10'3" en mousse polyuréthane (PU) pour la réalisation d'une planche de type longboard.

La mousse XTRAFOAM est facile à travailler et permet de réaliser des planches légères.
La latte est en contreplaqué 9mm

Pain de Mousse 7'3 Gun XTRAFOAM

XTRAFOAM 8'7" polyurethane (PU) foam block for making a gun-style board.

XTRAFOAM foam is easy to work with and allows for the creation of lightweight boards.
The slat is made of 16mm multi-ply plywood

XTRAFOAM 10'0" polyurethane (PU) foam block for making a gun-style board.

XTRAFOAM foam is easy to work with and allows for the creation of lightweight boards.
The slat is made of 22mm multi-ply plywood

Pain de Mousse XTRAFOAM 10'3" en mousse polyuréthane (PU) pour la réalisation d'une planche de type longboard.

La mousse XTRAFOAM est facile à travailler et permet de réaliser des planches légères.
La latte est en contreplaqué 9mm

Pain de Mousse XTRAFOAM 10'3" en mousse polyuréthane (PU) pour la réalisation d'une planche de type longboard.

La mousse XTRAFOAM est facile à travailler et permet de réaliser des planches légères.
La latte est en contreplaqué 9mm

Pain de Mousse XTRAFOAM 10'3" en mousse polyuréthane (PU) pour la réalisation d'une planche de type longboard.

La mousse XTRAFOAM est facile à travailler et permet de réaliser des planches légères.
La latte est en contreplaqué 9mm

Pain de Mousse XTRAFOAM 9'5" en mousse polyuréthane (PU) pour la réalisation d'une planche de type longboard.

La mousse XTRAFOAM est facile à travailler et permet de réaliser des planches légères.
La latte est en contreplaqué 9mm

Pain de Mousse XTRAFOAM 9'5" en mousse polyuréthane (PU) pour la réalisation d'une planche de type longboard.

La mousse XTRAFOAM est facile à travailler et permet de réaliser des planches légères.
La latte est en contreplaqué 9mm

A high-performance temporary fixing, specially designed for the implementation of carbon fibers.

CARBONtak™ is a high-performance aerosol adhesive that temporarily holds lightweight carbon fibers in place during the manufacturing of composite parts. It is particularly well-suited for producing natural-looking, unpainted carbon parts manufactured using the vacuum bagging process.

It ensures effective support of the fibers during the various preparation and implementation stages, while facilitating their positioning before impregnation with the resin.

The WoodKit PRO Custom Gather everything you need to make your Hollow surfboard from Paulownia wood and make construction easier with the top/bottom panels already glued in 600mm width.

It includes:

- The skeleton (FrameKit) laser-cut from your shape3D file using CNC technology
- Planed Paulownia panels for the deck/bottom (600mm wide and 6mm thick)
- 12 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Shape300 Gather everything you need to make your Hollow surfboard from Paulownia wood and make construction easier with the top/bottom panels already glued in 300mm.

It includes:

- 4 planed Paulownia boards for the deck/bottom (300mm wide and 5mm thick)
- 12 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.

Optional:
- Plywood panels ( 5mm poplar ply or 5.5mm Surfply3L) for cutting out the frame
- CNC laser cutting of the skeleton from a 3D shape file

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Basic includes everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- 8 planed Paulownia boards for the deck/bottom (150mm wide and 5mm thick)
- 12 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.

Optional:
- Plywood panels ( 5mm poplar ply or 5.5mm Surfply3L) for cutting out the frame
- CNC laser cutting of the skeleton from a 3D shape file

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Stiletto was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Spider was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Jiantou was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Infinity was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Mini Fish was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Malibu was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Murcielago was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Kanaloa was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Rocket was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Nexpa was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.