Plug FCS II vendu à l'unité.
Choississez votre coloris et inclinaison ci dessous.

Le coté droite/gauche se détermine en regardant la planche coté carène, vu de l'arrière.

Scotch premium 3M 233+ - 18mm

Résine Epoxy Resoltech 1070 + durcisseur KIT 1,4Kg

MEKP (PMEK) traditional catalytic SPR polyester resin is specially formulated for surfboard manufacturing and repair. It offers excellent versatility for lamination and hot coating , with controlled curing time and a professional-quality finish.

Appreciated by shapers for its ease of application , good transparency and compatibility with polyurethane foams, SPR resin is ideal for both professional workshops and demanding DIY projects.

⚠️ Usage tips

Catalyze at a rate of 2% with a MEKP (PMEK) hardener . Mix well before application.
Work in a ventilated environment and wear personal protective equipment.

MEKP (PMEK) traditional catalytic SPR polyester resin is specially formulated for surfboard manufacturing and repair. It offers excellent versatility for lamination and hot coating , with controlled curing time and a professional-quality finish.

Appreciated by shapers for its ease of application , good transparency and compatibility with polyurethane foams, SPR resin is ideal for both professional workshops and demanding DIY projects.

⚠️ Usage tips

Catalyze at a rate of 2% with a MEKP (PMEK) hardener . Mix well before application.
Work in a ventilated environment and wear personal protective equipment.

SPR GLOSS polyester resin is a specific formulation based on paraffin-impregnated styrene , designed for hot coat and gloss coat applications in surfboard manufacturing. It allows for complete surface polymerization , without a tacky effect, and guarantees a smooth, glossy, and durable finish.

Ideal for shapers seeking a professional finish, SPR GLOSS offers excellent surface tension, very good leveling and ease of sanding and polishing, for a high-end final result.

⚠️ Usage tips

Catalyze with a MEKP (PMEK) hardener at a dosage between 2 and 4%. Apply in a uniform layer.
Work in a clean, ventilated and temperature-controlled environment for optimal results.

Aerialite Volan 7534 6oz Fiberglass - 80cm Width

The FCS II Essential plug is designed to offer strength, lightness and reliability

Made from materials resistant to corrosion and mechanical stress, it guarantees excellent support of the fins, even in the most challenging conditions.
Compatible with FCS II fins, it allows for quick assembly without main fixing screws, for simple and efficient launching.

The right/left side is determined by looking at the board from the hull side, viewed from the rear.

MEKP (PMEK) traditional catalytic SPR polyester resin is specially formulated for surfboard manufacturing and repair. It offers excellent versatility for lamination and hot coating , with controlled curing time and a professional-quality finish.

Appreciated by shapers for its ease of application , good transparency and compatibility with polyurethane foams, SPR resin is ideal for both professional workshops and demanding DIY projects.

⚠️ Usage tips

Catalyze at a rate of 2% with a MEKP (PMEK) hardener . Mix well before application.
Work in a ventilated environment and wear personal protective equipment.

The FCS II Essential plug is designed to offer strength, lightness and reliability

Made from materials resistant to corrosion and mechanical stress, it guarantees excellent support of the fins, even in the most challenging conditions.
Compatible with FCS II fins, it allows for quick assembly without main fixing screws, for simple and efficient launching.

The right/left side is determined by looking at the board from the hull side, viewed from the rear.

Résine Epoxy Resoltech 1070 + durcisseur KIT 7Kg

RESOLTECH 1070 CLEAR resin is a colorless epoxy laminating system formulated for the manufacture of transparent composite parts with a high-quality gloss finish and excellent mechanical properties. After more than 5 years of research, the new formula further improves the UV resistance of the 1070 system, making it one of the most stable on the market.

1070 CLEAR is an epoxy system formulated for professionals who manufacture surfboards, windsurfs, kiteboards or other parts requiring a glossy and transparent surface appearance.

Longboard single fin Classic 10.25" Natural
Made of fiberglass  mat finish

Achieve precise and consistent machining of FCS II fin box housings with this routing template designed for use with a router or trim router equipped with a copy cutter.

This template allows you to faithfully reproduce the shape and dimensions of the locations intended for the FCS II Original boxes, for a clean and neat integration into your surfboard.

This range of trapezoidal gas and vapor filters combines excellent protection, comfort, and balance. Lightweight, low breathing resistance, and well-balanced when mounted on the mask. Provides an excellent field of vision due to its unique trapezoidal shape. The filters can be used on all 3M half and full face masks equipped with a bayonet fitting system, such as the 3M 7500 and 3M 6800. The bayonet system allows the filters to be attached with a click, simplifying installation.

Features

• Filters that protect against: Organic vapors (boiling point > 65 °C), inorganic vapors, acid gases, ammonia and its derivatives
• Standard: EN 141
• Can be combined with a dust filter

FCS II Dummy Fins are positioning tools specifically designed to facilitate the installation of FCS II fin boxes when manufacturing or repairing a surfboard.

Inserted into the housings before final mounting, these mounting brackets help maintain the housings in the correct orientation and ensure the intended tilt angle during installation. This contributes to precise and consistent alignment of the housings during bonding and lamination.

RESOLTECH 1070 CLEAR resin is a colorless epoxy laminating system formulated for the manufacture of transparent composite parts with a high-quality gloss finish and excellent mechanical properties. After more than 5 years of research, the new formula further improves the UV resistance of the 1070 system, making it one of the most stable on the market.

1070 CLEAR is an epoxy system formulated for professionals who manufacture surfboards, windsurfs, kiteboards or other parts requiring a glossy and transparent surface appearance.

Thruster fin G5 model Natural - FCS System
Made of fiberglass mat finish

This range of trapezoidal gas and vapor filters combines excellent protection, comfort, and balance. Lightweight, low breathing resistance, and well-balanced when mounted on the mask. Provides an excellent field of vision due to its unique trapezoidal shape. The filters can be used on all 3M half and full face masks equipped with a bayonet fitting system, such as the 3M 7500 and 3M 6800. The bayonet system allows the filters to be attached with a click, simplifying installation.

Features

• Filters that protect against: Organic vapors (boiling point > 65°C)
• Standard: EN 141
• Can be combined with a dust filter

6035 Dust Cartridges - 3M 7502 Mask

Longboard single fin Classic 9" Natural
Made of fiberglass  mat finish

3M 4251 A1P2 Mask

This foampad made of open-cell foam is designed to offer precision and control when shaping surfboards.
Its honeycomb structure allows for a homogeneous distribution of pressure , guaranteeing regular sanding without creating flat spots or unwanted marks on the foam block.

With its dimensions of 23 × 28 cm , it offers a comfortable working surface, ideal for sanding rails, rocker and curved areas , while remaining manageable and precise.
The foam naturally adapts to the shape of the board, facilitating clean and progressive work.

The Velcro fastening system allows for quick and secure attachment of abrasives, ensuring optimal support during work and easy change of grains according to the shaping stages.

Lightweight, ergonomic and durable, this foampad is an indispensable tool for shapers, from roughing out to finishing.

Résine Polyester SPR GLOSS - 5L

Masque 3M 4255 A2P2

Longboard single fin Classic 8" Natural
Made of fiberglass mat finish

Thruster fin G5 model Natural - FCS System
Made of fiberglass mat finish

Twin fin FK2 model Natural - FCS System
Made of fiberglass dark volan and mat finish

Longboard single fin Dolphin 6.5" Natural
Made of fiberglass and mat finish

La gamme RÉSOLTECH WWA est destinée aux applications décoratives (bijoux, meubles, tables rivières, œuvres d’art, lunettes, montres) ou industrielles (inclusions pour observation au microscope).

Totalement incolores et transparents, ces systèmes sont compatibles avec la plupart des supports comme le verre, le bois, le béton, le ciment, la pierre, la terre cuite, le métal... Toutes les résines de la gamme peuvent être teintées avec des colorants/pigments compatibles époxy. Il est aussi possible d’incorporer diverses charges (métalliques, poudre de nacre, ...).

Side fin GL Natural - FCS System
Made of fiberglass dark volan and mat finish

Twin fin MR 2+1 model Natural - FCS System
Made of fiberglass dark volan and mat finish