Home

The FCS II Essential plug is designed to offer strength, lightness and reliability

Made from materials resistant to corrosion and mechanical stress, it guarantees excellent support of the fins, even in the most challenging conditions.
Compatible with FCS II fins, it allows for quick assembly without main fixing screws, for simple and efficient launching.

The right/left side is determined by looking at the board from the hull side, viewed from the rear.

Fiberglass SHAPERS 4oz - 27'' width

Polishing paste - INDASA HIGH GLOSS 250gr

Indasa Rhynalox Plus Sandpaper Sheet - 40 Grit for Dry Sanding
230 x 280mm

MEKP (PMEK) traditional catalytic SPR polyester resin is specially formulated for surfboard manufacturing and repair. It offers excellent versatility for lamination and hot coating , with controlled curing time and a professional-quality finish.

Appreciated by shapers for its ease of application , good transparency and compatibility with polyurethane foams, SPR resin is ideal for both professional workshops and demanding DIY projects.

⚠️ Usage tips

Catalyze at a rate of 2% with a MEKP (PMEK) hardener . Mix well before application.
Work in a ventilated environment and wear personal protective equipment.

The FCS II Essential plug is designed to offer strength, lightness and reliability

Made from materials resistant to corrosion and mechanical stress, it guarantees excellent support of the fins, even in the most challenging conditions.
Compatible with FCS II fins, it allows for quick assembly without main fixing screws, for simple and efficient launching.

The right/left side is determined by looking at the board from the hull side, viewed from the rear.

Polishing paste - INDASA HIGH GLOSS 1Kg

Indasa Rhynalox Plus Sandpaper Sheet - 60 Grit for Dry Sanding
230 x 280mm

Fiberglass SHAPERS 4oz - 80cm width

Pâte à polir - INDASA COMPOUND 250gr

Indasa Rhynalox Plus Sandpaper Sheet - 80 Grit for Dry Sanding
230 x 280mm

Plug FCS II vendu à l'unité.
Choississez votre coloris et inclinaison ci dessous.

Le coté droite/gauche se détermine en regardant la planche coté carène, vu de l'arrière.

Fiberglass SHAPERS 6oz - 80cm width

Plug FCS II vendu à l'unité.
Choississez votre coloris et inclinaison ci dessous.

Le coté droite/gauche se détermine en regardant la planche coté carène, vu de l'arrière.

Fibre de verre SHAPERS 6oz - 105cm largeur

Polishing paste - INDASA COMPOUND 1Kg

Indasa Rhynalox Plus Sandpaper Sheet - 120 Grit for Dry Sanding
230 x 280mm

SPR GLOSS polyester resin is a specific formulation based on paraffin-impregnated styrene , designed for hot coat and gloss coat applications in surfboard manufacturing. It allows for complete surface polymerization , without a tacky effect, and guarantees a smooth, glossy, and durable finish.

Ideal for shapers seeking a professional finish, SPR GLOSS offers excellent surface tension, very good leveling and ease of sanding and polishing, for a high-end final result.

⚠️ Usage tips

Catalyze with a MEKP (PMEK) hardener at a dosage between 2 and 4%. Apply in a uniform layer.
Work in a clean, ventilated and temperature-controlled environment for optimal results.

Rhyno Double Sided Sponge - Medium grit

Indasa Rhynalox Plus Sandpaper Sheet - 180 Grit for Dry Sanding
230 x 280mm

S-GLASS 4oz fiberglass - 65cm width

MEKP (PMEK) traditional catalytic SPR polyester resin is specially formulated for surfboard manufacturing and repair. It offers excellent versatility for lamination and hot coating , with controlled curing time and a professional-quality finish.

Appreciated by shapers for its ease of application , good transparency and compatibility with polyurethane foams, SPR resin is ideal for both professional workshops and demanding DIY projects.

⚠️ Usage tips

Catalyze at a rate of 2% with a MEKP (PMEK) hardener . Mix well before application.
Work in a ventilated environment and wear personal protective equipment.

Rhyno Double Sided Sponge - Medium grit

Achieve precise and consistent machining of FCS II fin box housings with this routing template designed for use with a router or trim router equipped with a copy cutter.

This template allows you to faithfully reproduce the shape and dimensions of the locations intended for the FCS II Original boxes, for a clean and neat integration into your surfboard.

Indasa Rhynalox Plus Sandpaper Sheet - 240 Grit for Dry Sanding
230 x 280mm

FlexPad 150mm Soft

Rhyno Double Sided Sponge - Super Fine grit

The Under Glass FCS II copy milling cutter is designed to accurately create the housings for FCS II fin boxes when manufacturing or repairing surfboards.

When used with a compatible router or trimmer, it allows you to work by copying onto a suitable template to obtain precise and regular machining, facilitating the integration of the boxes into the structure of the board.
Its 1/4" (6.35 mm) shaft allows it to be mounted on machines equipped with a clamping collet corresponding to this diameter.

Indasa Rhynalox Plus Sandpaper Sheet - 320 Grit for Dry Sanding
230 x 280mm

FlexPad 150mm medium

Rhyno Double Sided Sponge - Ultra Fine grit

FCS II Dummy Fins are positioning tools specifically designed to facilitate the installation of FCS II fin boxes when manufacturing or repairing a surfboard.

Inserted into the housings before final mounting, these mounting brackets help maintain the housings in the correct orientation and ensure the intended tilt angle during installation. This contributes to precise and consistent alignment of the housings during bonding and lamination.