Home

The FCS II Essential plug is designed to offer strength, lightness and reliability

Made from materials resistant to corrosion and mechanical stress, it guarantees excellent support of the fins, even in the most challenging conditions.
Compatible with FCS II fins, it allows for quick assembly without main fixing screws, for simple and efficient launching.

The right/left side is determined by looking at the board from the hull side, viewed from the rear.

EON Foam 6'6"SB foam block molded in France (Brittany) unslatted.

What does biomass mean?
Made from NEOPS® polystyrene from KNAUF INDUSTRIES® , the naphtha from oil refining has been replaced by a plant-based naphtha from the compression of plants: public and private pruning, agricultural rotations, clearing, dead leaves, grass cuttings taken to the recycling center.
The foam is also 100% recyclable through the Knauf Circular reprocessing network.

The polystyrene beads are agglomerated in a mold close to the final shape under high pressure, allowing excellent compressive strength, low water and resin absorption during lamination and an easier sanding finish compared to conventional polystyrene in blocks.

MEKP (PMEK) traditional catalytic SPR polyester resin is specially formulated for surfboard manufacturing and repair. It offers excellent versatility for lamination and hot coating , with controlled curing time and a professional-quality finish.

Appreciated by shapers for its ease of application , good transparency and compatibility with polyurethane foams, SPR resin is ideal for both professional workshops and demanding DIY projects.

⚠️ Usage tips

Catalyze at a rate of 2% with a MEKP (PMEK) hardener . Mix well before application.
Work in a ventilated environment and wear personal protective equipment.

The FCS II Essential plug is designed to offer strength, lightness and reliability

Made from materials resistant to corrosion and mechanical stress, it guarantees excellent support of the fins, even in the most challenging conditions.
Compatible with FCS II fins, it allows for quick assembly without main fixing screws, for simple and efficient launching.

The right/left side is determined by looking at the board from the hull side, viewed from the rear.

Pain de mousse  EON Foam 6'6"SB moulés en France (Bretagne), lattage 3mm Plywood

Biomass ça veut dire quoi ?
Fabriqués à partir de polystyrène NEOPS® de KNAUF INDUSTRIES®, le naphta issu du raffinage du pétrole a été remplacé par un naptha végétal issu de la compression des végétaux : élagages publics et privés, rotations agricoles, débroussaillages, feuilles mortes, tontes amenées en déchetterie.
La mousse est également 100% recyclable via le réseau de retraitement Knauf Circular. 

Les billes de polystyrène sont agglomérées dans un moule proche du shape final sous haute pression, permettant une excellente résistance à la compression, une faible absorption d'eau et de résine lors de la stratification et une finition facilitée au ponçage par rapport au polystyrène conventionnel en blocs.

Plug FCS II vendu à l'unité.
Choississez votre coloris et inclinaison ci dessous.

Le coté droite/gauche se détermine en regardant la planche coté carène, vu de l'arrière.

Pain de mousse  EON Foam 7'6"MALIBU moulés en France (Bretagne) non latté.

Biomass ça veut dire quoi ?
Fabriqués à partir de polystyrène NEOPS® de KNAUF INDUSTRIES®, le naphta issu du raffinage du pétrole a été remplacé par un naptha végétal issu de la compression des végétaux : élagages publics et privés, rotations agricoles, débroussaillages, feuilles mortes, tontes amenées en déchetterie.
La mousse est également 100% recyclable via le réseau de retraitement Knauf Circular. 

Les billes de polystyrène sont agglomérées dans un moule proche du shape final sous haute pression, permettant une excellente résistance à la compression, une faible absorption d'eau et de résine lors de la stratification et une finition facilitée au ponçage par rapport au polystyrène conventionnel en blocs.

Plug FCS II vendu à l'unité.
Choississez votre coloris et inclinaison ci dessous.

Le coté droite/gauche se détermine en regardant la planche coté carène, vu de l'arrière.

SPR GLOSS polyester resin is a specific formulation based on paraffin-impregnated styrene , designed for hot coat and gloss coat applications in surfboard manufacturing. It allows for complete surface polymerization , without a tacky effect, and guarantees a smooth, glossy, and durable finish.

Ideal for shapers seeking a professional finish, SPR GLOSS offers excellent surface tension, very good leveling and ease of sanding and polishing, for a high-end final result.

⚠️ Usage tips

Catalyze with a MEKP (PMEK) hardener at a dosage between 2 and 4%. Apply in a uniform layer.
Work in a clean, ventilated and temperature-controlled environment for optimal results.

Pain de mousse  EON Foam 7'6"MALIBU moulés en France (Bretagne), lattage 3mm Plywood

Biomass ça veut dire quoi ?
Fabriqués à partir de polystyrène NEOPS® de KNAUF INDUSTRIES®, le naphta issu du raffinage du pétrole a été remplacé par un naptha végétal issu de la compression des végétaux : élagages publics et privés, rotations agricoles, débroussaillages, feuilles mortes, tontes amenées en déchetterie.
La mousse est également 100% recyclable via le réseau de retraitement Knauf Circular. 

Les billes de polystyrène sont agglomérées dans un moule proche du shape final sous haute pression, permettant une excellente résistance à la compression, une faible absorption d'eau et de résine lors de la stratification et une finition facilitée au ponçage par rapport au polystyrène conventionnel en blocs.

Pain de mousse  EON Foam 9'4"MALIBU moulés en France (Bretagne), lattage 6mm Plywood

Biomass ça veut dire quoi ?
Fabriqués à partir de polystyrène NEOPS® de KNAUF INDUSTRIES®, le naphta issu du raffinage du pétrole a été remplacé par un naptha végétal issu de la compression des végétaux : élagages publics et privés, rotations agricoles, débroussaillages, feuilles mortes, tontes amenées en déchetterie.
La mousse est également 100% recyclable via le réseau de retraitement Knauf Circular. 

Les billes de polystyrène sont agglomérées dans un moule proche du shape final sous haute pression, permettant une excellente résistance à la compression, une faible absorption d'eau et de résine lors de la stratification et une finition facilitée au ponçage par rapport au polystyrène conventionnel en blocs.

MEKP (PMEK) traditional catalytic SPR polyester resin is specially formulated for surfboard manufacturing and repair. It offers excellent versatility for lamination and hot coating , with controlled curing time and a professional-quality finish.

Appreciated by shapers for its ease of application , good transparency and compatibility with polyurethane foams, SPR resin is ideal for both professional workshops and demanding DIY projects.

⚠️ Usage tips

Catalyze at a rate of 2% with a MEKP (PMEK) hardener . Mix well before application.
Work in a ventilated environment and wear personal protective equipment.

Achieve precise and consistent machining of FCS II fin box housings with this routing template designed for use with a router or trim router equipped with a copy cutter.

This template allows you to faithfully reproduce the shape and dimensions of the locations intended for the FCS II Original boxes, for a clean and neat integration into your surfboard.

The Under Glass FCS II copy milling cutter is designed to accurately create the housings for FCS II fin boxes when manufacturing or repairing surfboards.

When used with a compatible router or trimmer, it allows you to work by copying onto a suitable template to obtain precise and regular machining, facilitating the integration of the boxes into the structure of the board.
Its 1/4" (6.35 mm) shaft allows it to be mounted on machines equipped with a clamping collet corresponding to this diameter.

FCS II Dummy Fins are positioning tools specifically designed to facilitate the installation of FCS II fin boxes when manufacturing or repairing a surfboard.

Inserted into the housings before final mounting, these mounting brackets help maintain the housings in the correct orientation and ensure the intended tilt angle during installation. This contributes to precise and consistent alignment of the housings during bonding and lamination.

Résine Epoxy Resoltech 1070 + durcisseur KIT 1,4Kg

Résine Polyester SPR GLOSS - 5L

The FCS / FCS II compatibility kit allows the use of fins equipped with the Dual Tab system (classic FCS) in FCS II generation bodies.

This practical solution offers the possibility of keeping and reusing your classic FCS fins on a board equipped with FCS II plugs, without having to replace your set of fins.

Hexcel 1522 4oz Fiberglass - 65cm Width

Résine Epoxy Resoltech 1070 + durcisseur KIT 7Kg

MEKP (PMEK) traditional catalytic SPR polyester resin is specially formulated for surfboard manufacturing and repair. It offers excellent versatility for lamination and hot coating , with controlled curing time and a professional-quality finish.

Appreciated by shapers for its ease of application , good transparency and compatibility with polyurethane foams, SPR resin is ideal for both professional workshops and demanding DIY projects.

⚠️ Usage tips

Catalyze at a rate of 2% with a MEKP (PMEK) hardener . Mix well before application.
Work in a ventilated environment and wear personal protective equipment.

La gamme RÉSOLTECH WWA est destinée aux applications décoratives (bijoux, meubles, tables rivières, œuvres d’art, lunettes, montres) ou industrielles (inclusions pour observation au microscope).

Totalement incolores et transparents, ces systèmes sont compatibles avec la plupart des supports comme le verre, le bois, le béton, le ciment, la pierre, la terre cuite, le métal... Toutes les résines de la gamme peuvent être teintées avec des colorants/pigments compatibles époxy. Il est aussi possible d’incorporer diverses charges (métalliques, poudre de nacre, ...).

Hexcel 1184 6oz Fiberglass - 80cm Width

The RÉSOLTECH WWA range is intended for decorative applications (jewelry, furniture, river tables, works of art, glasses, watches) or industrial applications (inclusions for observation under a microscope).

Completely colorless and transparent, these systems are compatible with most substrates such as glass, wood, concrete, cement, stone, terracotta, metal, etc. All the resins in the range can be tinted with epoxy-compatible colorants/pigments. It is also possible to incorporate various fillers (metallic, mother-of-pearl powder, etc.).

RESOLTECH 1070 CLEAR resin is a colorless epoxy laminating system formulated for the manufacture of transparent composite parts with a high-quality gloss finish and excellent mechanical properties. After more than 5 years of research, the new formula further improves the UV resistance of the 1070 system, making it one of the most stable on the market.

1070 CLEAR is an epoxy system formulated for professionals who manufacture surfboards, windsurfs, kiteboards or other parts requiring a glossy and transparent surface appearance.

Hexcel 471 6oz Fiberglass - 80cm Width

RESOLTECH 1070 CLEAR resin is a colorless epoxy laminating system formulated for the manufacture of transparent composite parts with a high-quality gloss finish and excellent mechanical properties. After more than 5 years of research, the new formula further improves the UV resistance of the 1070 system, making it one of the most stable on the market.

1070 CLEAR is an epoxy system formulated for professionals who manufacture surfboards, windsurfs, kiteboards or other parts requiring a glossy and transparent surface appearance.

Hexcel 1266 6oz Fiberglass - 130cm Width

Résine Epoxy Resoltech 1070 + durcisseur KIT 29Kg

The RÉSOLTECH WWA range is intended for decorative applications (jewelry, furniture, river tables, works of art, glasses, watches) or industrial applications (inclusions for observation under a microscope).

Completely colorless and transparent, these systems are compatible with most substrates such as glass, wood, concrete, cement, stone, terracotta, metal, etc. All the resins in the range can be tinted with epoxy-compatible colorants/pigments. It is also possible to incorporate various fillers (metallic, mother-of-pearl powder, etc.).

Aerialite Volan 7534 6oz Fiberglass - 80cm Width

The WoodKit PRO Mini Simmons was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.