Home

Fiberglass SHAPERS 4oz - 27'' width

EON Foam 6'6"SB foam block molded in France (Brittany) unslatted.

What does biomass mean?
Made from NEOPS® polystyrene from KNAUF INDUSTRIES® , the naphtha from oil refining has been replaced by a plant-based naphtha from the compression of plants: public and private pruning, agricultural rotations, clearing, dead leaves, grass cuttings taken to the recycling center.
The foam is also 100% recyclable through the Knauf Circular reprocessing network.

The polystyrene beads are agglomerated in a mold close to the final shape under high pressure, allowing excellent compressive strength, low water and resin absorption during lamination and an easier sanding finish compared to conventional polystyrene in blocks.

MEKP (PMEK) traditional catalytic SPR polyester resin is specially formulated for surfboard manufacturing and repair. It offers excellent versatility for lamination and hot coating , with controlled curing time and a professional-quality finish.

Appreciated by shapers for its ease of application , good transparency and compatibility with polyurethane foams, SPR resin is ideal for both professional workshops and demanding DIY projects.

⚠️ Usage tips

Catalyze at a rate of 2% with a MEKP (PMEK) hardener . Mix well before application.
Work in a ventilated environment and wear personal protective equipment.

Pain de mousse  EON Foam 6'6"SB moulés en France (Bretagne), lattage 3mm Plywood

Biomass ça veut dire quoi ?
Fabriqués à partir de polystyrène NEOPS® de KNAUF INDUSTRIES®, le naphta issu du raffinage du pétrole a été remplacé par un naptha végétal issu de la compression des végétaux : élagages publics et privés, rotations agricoles, débroussaillages, feuilles mortes, tontes amenées en déchetterie.
La mousse est également 100% recyclable via le réseau de retraitement Knauf Circular. 

Les billes de polystyrène sont agglomérées dans un moule proche du shape final sous haute pression, permettant une excellente résistance à la compression, une faible absorption d'eau et de résine lors de la stratification et une finition facilitée au ponçage par rapport au polystyrène conventionnel en blocs.

Scotch premium 3M 233+ - 18mm

Fiberglass SHAPERS 4oz - 80cm width

Fiberglass SHAPERS 6oz - 80cm width

Pain de mousse  EON Foam 7'6"MALIBU moulés en France (Bretagne) non latté.

Biomass ça veut dire quoi ?
Fabriqués à partir de polystyrène NEOPS® de KNAUF INDUSTRIES®, le naphta issu du raffinage du pétrole a été remplacé par un naptha végétal issu de la compression des végétaux : élagages publics et privés, rotations agricoles, débroussaillages, feuilles mortes, tontes amenées en déchetterie.
La mousse est également 100% recyclable via le réseau de retraitement Knauf Circular. 

Les billes de polystyrène sont agglomérées dans un moule proche du shape final sous haute pression, permettant une excellente résistance à la compression, une faible absorption d'eau et de résine lors de la stratification et une finition facilitée au ponçage par rapport au polystyrène conventionnel en blocs.

Fibre de verre SHAPERS 6oz - 105cm largeur

SPR GLOSS polyester resin is a specific formulation based on paraffin-impregnated styrene , designed for hot coat and gloss coat applications in surfboard manufacturing. It allows for complete surface polymerization , without a tacky effect, and guarantees a smooth, glossy, and durable finish.

Ideal for shapers seeking a professional finish, SPR GLOSS offers excellent surface tension, very good leveling and ease of sanding and polishing, for a high-end final result.

⚠️ Usage tips

Catalyze with a MEKP (PMEK) hardener at a dosage between 2 and 4%. Apply in a uniform layer.
Work in a clean, ventilated and temperature-controlled environment for optimal results.

Pain de mousse  EON Foam 7'6"MALIBU moulés en France (Bretagne), lattage 3mm Plywood

Biomass ça veut dire quoi ?
Fabriqués à partir de polystyrène NEOPS® de KNAUF INDUSTRIES®, le naphta issu du raffinage du pétrole a été remplacé par un naptha végétal issu de la compression des végétaux : élagages publics et privés, rotations agricoles, débroussaillages, feuilles mortes, tontes amenées en déchetterie.
La mousse est également 100% recyclable via le réseau de retraitement Knauf Circular. 

Les billes de polystyrène sont agglomérées dans un moule proche du shape final sous haute pression, permettant une excellente résistance à la compression, une faible absorption d'eau et de résine lors de la stratification et une finition facilitée au ponçage par rapport au polystyrène conventionnel en blocs.

Pain de mousse  EON Foam 9'4"MALIBU moulés en France (Bretagne), lattage 6mm Plywood

Biomass ça veut dire quoi ?
Fabriqués à partir de polystyrène NEOPS® de KNAUF INDUSTRIES®, le naphta issu du raffinage du pétrole a été remplacé par un naptha végétal issu de la compression des végétaux : élagages publics et privés, rotations agricoles, débroussaillages, feuilles mortes, tontes amenées en déchetterie.
La mousse est également 100% recyclable via le réseau de retraitement Knauf Circular. 

Les billes de polystyrène sont agglomérées dans un moule proche du shape final sous haute pression, permettant une excellente résistance à la compression, une faible absorption d'eau et de résine lors de la stratification et une finition facilitée au ponçage par rapport au polystyrène conventionnel en blocs.

S-GLASS 4oz fiberglass - 65cm width

MEKP (PMEK) traditional catalytic SPR polyester resin is specially formulated for surfboard manufacturing and repair. It offers excellent versatility for lamination and hot coating , with controlled curing time and a professional-quality finish.

Appreciated by shapers for its ease of application , good transparency and compatibility with polyurethane foams, SPR resin is ideal for both professional workshops and demanding DIY projects.

⚠️ Usage tips

Catalyze at a rate of 2% with a MEKP (PMEK) hardener . Mix well before application.
Work in a ventilated environment and wear personal protective equipment.

Résine Epoxy Resoltech 1070 + durcisseur KIT 1,4Kg

Résine Polyester SPR GLOSS - 5L

3M 4251 A1P2 Mask

Résine Epoxy Resoltech 1070 + durcisseur KIT 7Kg

MEKP (PMEK) traditional catalytic SPR polyester resin is specially formulated for surfboard manufacturing and repair. It offers excellent versatility for lamination and hot coating , with controlled curing time and a professional-quality finish.

Appreciated by shapers for its ease of application , good transparency and compatibility with polyurethane foams, SPR resin is ideal for both professional workshops and demanding DIY projects.

⚠️ Usage tips

Catalyze at a rate of 2% with a MEKP (PMEK) hardener . Mix well before application.
Work in a ventilated environment and wear personal protective equipment.

Masque 3M 4255 A2P2

La gamme RÉSOLTECH WWA est destinée aux applications décoratives (bijoux, meubles, tables rivières, œuvres d’art, lunettes, montres) ou industrielles (inclusions pour observation au microscope).

Totalement incolores et transparents, ces systèmes sont compatibles avec la plupart des supports comme le verre, le bois, le béton, le ciment, la pierre, la terre cuite, le métal... Toutes les résines de la gamme peuvent être teintées avec des colorants/pigments compatibles époxy. Il est aussi possible d’incorporer diverses charges (métalliques, poudre de nacre, ...).

Masque 3M 7502 A2P3

The RÉSOLTECH WWA range is intended for decorative applications (jewelry, furniture, river tables, works of art, glasses, watches) or industrial applications (inclusions for observation under a microscope).

Completely colorless and transparent, these systems are compatible with most substrates such as glass, wood, concrete, cement, stone, terracotta, metal, etc. All the resins in the range can be tinted with epoxy-compatible colorants/pigments. It is also possible to incorporate various fillers (metallic, mother-of-pearl powder, etc.).

RESOLTECH 1070 CLEAR resin is a colorless epoxy laminating system formulated for the manufacture of transparent composite parts with a high-quality gloss finish and excellent mechanical properties. After more than 5 years of research, the new formula further improves the UV resistance of the 1070 system, making it one of the most stable on the market.

1070 CLEAR is an epoxy system formulated for professionals who manufacture surfboards, windsurfs, kiteboards or other parts requiring a glossy and transparent surface appearance.

Masque 3M intégral 6800

RESOLTECH 1070 CLEAR resin is a colorless epoxy laminating system formulated for the manufacture of transparent composite parts with a high-quality gloss finish and excellent mechanical properties. After more than 5 years of research, the new formula further improves the UV resistance of the 1070 system, making it one of the most stable on the market.

1070 CLEAR is an epoxy system formulated for professionals who manufacture surfboards, windsurfs, kiteboards or other parts requiring a glossy and transparent surface appearance.

6035 Dust Cartridges - 3M 7502 Mask

This range of trapezoidal gas and vapor filters combines excellent protection, comfort, and balance. Lightweight, low breathing resistance, and well-balanced when mounted on the mask. Provides an excellent field of vision due to its unique trapezoidal shape. The filters can be used on all 3M half and full face masks equipped with a bayonet fitting system, such as the 3M 7500 and 3M 6800. The bayonet system allows the filters to be attached with a click, simplifying installation.

Features

• Filters that protect against: Organic vapors (boiling point > 65°C)
• Standard: EN 141
• Can be combined with a dust filter

Résine Epoxy Resoltech 1070 + durcisseur KIT 29Kg

This range of trapezoidal gas and vapor filters combines excellent protection, comfort, and balance. Lightweight, low breathing resistance, and well-balanced when mounted on the mask. Provides an excellent field of vision due to its unique trapezoidal shape. The filters can be used on all 3M half and full face masks equipped with a bayonet fitting system, such as the 3M 7500 and 3M 6800. The bayonet system allows the filters to be attached with a click, simplifying installation.

Features

• Filters that protect against: Organic vapors (boiling point > 65 °C), inorganic vapors, acid gases, ammonia and its derivatives
• Standard: EN 141
• Can be combined with a dust filter

The RÉSOLTECH WWA range is intended for decorative applications (jewelry, furniture, river tables, works of art, glasses, watches) or industrial applications (inclusions for observation under a microscope).

Completely colorless and transparent, these systems are compatible with most substrates such as glass, wood, concrete, cement, stone, terracotta, metal, etc. All the resins in the range can be tinted with epoxy-compatible colorants/pigments. It is also possible to incorporate various fillers (metallic, mother-of-pearl powder, etc.).

This foampad made of open-cell foam is designed to offer precision and control when shaping surfboards.
Its honeycomb structure allows for a homogeneous distribution of pressure , guaranteeing regular sanding without creating flat spots or unwanted marks on the foam block.

With its dimensions of 23 × 28 cm , it offers a comfortable working surface, ideal for sanding rails, rocker and curved areas , while remaining manageable and precise.
The foam naturally adapts to the shape of the board, facilitating clean and progressive work.

The Velcro fastening system allows for quick and secure attachment of abrasives, ensuring optimal support during work and easy change of grains according to the shaping stages.

Lightweight, ergonomic and durable, this foampad is an indispensable tool for shapers, from roughing out to finishing.