Home

White anti-static wiping pads, prevent eyes from getting dirty on epoxy and polyester hot coats.

Sold in full boxes of 10. Dimensions: 82 x 45 cm.

Fibre de verre SHAPERS 6oz - 105cm largeur

This range of trapezoidal gas and vapor filters combines excellent protection, comfort, and balance. Lightweight, low breathing resistance, and well-balanced when mounted on the mask. Provides an excellent field of vision due to its unique trapezoidal shape. The filters can be used on all 3M half and full face masks equipped with a bayonet fitting system, such as the 3M 7500 and 3M 6800. The bayonet system allows the filters to be attached with a click, simplifying installation.

Features

• Filters that protect against: Organic vapors (boiling point > 65 °C), inorganic vapors, acid gases, ammonia and its derivatives
• Standard: EN 141
• Can be combined with a dust filter

Hexcel TV235 Fiberglass 3oz / 86gr - 105cm width

Pain de mousse  EON Foam 9'4"MALIBU moulés en France (Bretagne), lattage 6mm Plywood

Biomass ça veut dire quoi ?
Fabriqués à partir de polystyrène NEOPS® de KNAUF INDUSTRIES®, le naphta issu du raffinage du pétrole a été remplacé par un naptha végétal issu de la compression des végétaux : élagages publics et privés, rotations agricoles, débroussaillages, feuilles mortes, tontes amenées en déchetterie.
La mousse est également 100% recyclable via le réseau de retraitement Knauf Circular. 

Les billes de polystyrène sont agglomérées dans un moule proche du shape final sous haute pression, permettant une excellente résistance à la compression, une faible absorption d'eau et de résine lors de la stratification et une finition facilitée au ponçage par rapport au polystyrène conventionnel en blocs.

Fiberglass SHAPERS 4oz - 27'' width

Hexcel TV1080 2oz / 48gr Fiberglass - 110cm width

RESOLTECH 1070 CLEAR resin is a colorless epoxy laminating system formulated for the manufacture of transparent composite parts with a high-quality gloss finish and excellent mechanical properties. After more than 5 years of research, the new formula further improves the UV resistance of the 1070 system, making it one of the most stable on the market.

1070 CLEAR is an epoxy system formulated for professionals who manufacture surfboards, windsurfs, kiteboards or other parts requiring a glossy and transparent surface appearance.

RESOLTECH 1070 CLEAR resin is a colorless epoxy laminating system formulated for the manufacture of transparent composite parts with a high-quality gloss finish and excellent mechanical properties. After more than 5 years of research, the new formula further improves the UV resistance of the 1070 system, making it one of the most stable on the market.

1070 CLEAR is an epoxy system formulated for professionals who manufacture surfboards, windsurfs, kiteboards or other parts requiring a glossy and transparent surface appearance.

Pain de mousse  EON Foam 6'6"SB moulés en France (Bretagne), lattage 3mm Plywood

Biomass ça veut dire quoi ?
Fabriqués à partir de polystyrène NEOPS® de KNAUF INDUSTRIES®, le naphta issu du raffinage du pétrole a été remplacé par un naptha végétal issu de la compression des végétaux : élagages publics et privés, rotations agricoles, débroussaillages, feuilles mortes, tontes amenées en déchetterie.
La mousse est également 100% recyclable via le réseau de retraitement Knauf Circular. 

Les billes de polystyrène sont agglomérées dans un moule proche du shape final sous haute pression, permettant une excellente résistance à la compression, une faible absorption d'eau et de résine lors de la stratification et une finition facilitée au ponçage par rapport au polystyrène conventionnel en blocs.

EON Foam 6'6"SB foam block molded in France (Brittany) unslatted.

What does biomass mean?
Made from NEOPS® polystyrene from KNAUF INDUSTRIES® , the naphtha from oil refining has been replaced by a plant-based naphtha from the compression of plants: public and private pruning, agricultural rotations, clearing, dead leaves, grass cuttings taken to the recycling center.
The foam is also 100% recyclable through the Knauf Circular reprocessing network.

The polystyrene beads are agglomerated in a mold close to the final shape under high pressure, allowing excellent compressive strength, low water and resin absorption during lamination and an easier sanding finish compared to conventional polystyrene in blocks.

Scotch premium 3M 233+ - 18mm

This range of trapezoidal gas and vapor filters combines excellent protection, comfort, and balance. Lightweight, low breathing resistance, and well-balanced when mounted on the mask. Provides an excellent field of vision due to its unique trapezoidal shape. The filters can be used on all 3M half and full face masks equipped with a bayonet fitting system, such as the 3M 7500 and 3M 6800. The bayonet system allows the filters to be attached with a click, simplifying installation.

Features

• Filters that protect against: Organic vapors (boiling point > 65°C)
• Standard: EN 141
• Can be combined with a dust filter

6035 Dust Cartridges - 3M 7502 Mask

Masque 3M intégral 6800

Masque 3M 7502 A2P3

Masque 3M 4255 A2P2

3M 4251 A1P2 Mask

Hexcel 1266 6oz Fiberglass - 130cm Width

Aerialite Volan 7534 6oz Fiberglass - 80cm Width

Hexcel 471 6oz Fiberglass - 80cm Width

Hexcel 1184 6oz Fiberglass - 80cm Width

Fiberglass SHAPERS 6oz - 80cm width

Fiberglass SHAPERS 4oz - 80cm width

S-GLASS 4oz fiberglass - 65cm width

Hexcel 1522 4oz Fiberglass - 65cm Width

The RÉSOLTECH WWA range is intended for decorative applications (jewelry, furniture, river tables, works of art, glasses, watches) or industrial applications (inclusions for observation under a microscope).

Completely colorless and transparent, these systems are compatible with most substrates such as glass, wood, concrete, cement, stone, terracotta, metal, etc. All the resins in the range can be tinted with epoxy-compatible colorants/pigments. It is also possible to incorporate various fillers (metallic, mother-of-pearl powder, etc.).

Résine Epoxy Resoltech 1070 + durcisseur KIT 29Kg

The RÉSOLTECH WWA range is intended for decorative applications (jewelry, furniture, river tables, works of art, glasses, watches) or industrial applications (inclusions for observation under a microscope).

Completely colorless and transparent, these systems are compatible with most substrates such as glass, wood, concrete, cement, stone, terracotta, metal, etc. All the resins in the range can be tinted with epoxy-compatible colorants/pigments. It is also possible to incorporate various fillers (metallic, mother-of-pearl powder, etc.).

Résine Epoxy Resoltech 1070 + durcisseur KIT 7Kg

La gamme RÉSOLTECH WWA est destinée aux applications décoratives (bijoux, meubles, tables rivières, œuvres d’art, lunettes, montres) ou industrielles (inclusions pour observation au microscope).

Totalement incolores et transparents, ces systèmes sont compatibles avec la plupart des supports comme le verre, le bois, le béton, le ciment, la pierre, la terre cuite, le métal... Toutes les résines de la gamme peuvent être teintées avec des colorants/pigments compatibles époxy. Il est aussi possible d’incorporer diverses charges (métalliques, poudre de nacre, ...).

Résine Epoxy Resoltech 1070 + durcisseur KIT 1,4Kg