Home

This assortment of 4 abrasive sheets is designed to effectively accompany all stages of surfboard shaping, from roughing to finishing.
Compatible with the Velcro fasteners of shaping blocks , the sheets can be mounted quickly and offer reliable support during work.

The pack includes:

• 2 standard abrasive sheets

  • 80 grit: shaping and material removal

  • 150 grit: refining the shape and preparing for finishing

• 2 network finishing abrasive sheets (mesh)

  • 240 grit: pre-finishing and smoothing of surfaces

  • 320 grit: fine finish and homogeneous surface

Network sheets ensure excellent dust evacuation , limiting clogging and guaranteeing regular and controlled sanding.

Versatile and practical, this assortment allows for progressive and controlled work , ideal for shapers wishing to cover the entire shaping process with a single pack.

POSCA water-based paint marker for all types of surfaces. PC8K - 8mm broad chisel tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

POSCA water-based paint marker for all types of surfaces. PC5M - 2.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

POSCA water-based paint marker for all types of surfaces. PC3M - 1.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

MTN 94 400ml - RV-47 Red Clandestine -

Hexcel Flax Fiber 6oz - 100cm width

EPS BLANK SUP Foam Bread

A single fin designed for surfers who seek classic feel combined with modern performance. Perfect for longboards or mid-length boards, this fin excels in providing smooth glide, control, and maneuverability while maintaining the timeless essence of single-fin surfing. With a curved, raked-back shape, this single fin combines flexibility, stability, and maneuverability. Its A-shaped outline allows for sharp turns and fluid carving while maintaining a smooth ride through critical sections.

In this size, it is certainly one of the best longboard fins for surfers who value fluidity, style, and a responsive, smooth ride. It’s particularly suited to surfers who want the best of both worlds: the classic feel of single-fin longboarding with the performance edge that modern longboarders crave. Works perfectly on squaretail or pintail longboards. Best for small and mid-size waves.

Red translucent pigment 250 g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

POSCA water-based paint marker for all types of surfaces. PC3M - 1.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

SURF BLANK 6'11 F  FIsh MILLENNIUM 3/16 darkwood Density : BLUE standard

The WoodKit PRO Stiletto was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

This foampad made of open-cell foam is designed to offer precision and control when shaping surfboards.
Its honeycomb structure allows for a homogeneous distribution of pressure , guaranteeing regular sanding without creating flat spots or unwanted marks on the foam block.

With its dimensions of 23 × 28 cm , it offers a comfortable working surface, ideal for sanding rails, rocker and curved areas , while remaining manageable and precise.
The foam naturally adapts to the shape of the board, facilitating clean and progressive work.

The Velcro fastening system allows for quick and secure attachment of abrasives, ensuring optimal support during work and easy change of grains according to the shaping stages.

Lightweight, ergonomic and durable, this foampad is an indispensable tool for shapers, from roughing out to finishing.

Longboard single fin Classic 6.5" Natural
Made of fiberglass  mat finish

NETWORK 200 mm - grain 600 velcro

XTRAFOAM 10'0" polyurethane (PU) foam block for making a gun-style board.

XTRAFOAM foam is easy to work with and allows for the creation of lightweight boards.
The slat is made of 22mm multi-ply plywood