Home

Goldband 5mm masking tape is specially designed for masking paintwork and installing fin boxes.
Thanks to its slim 5mm width, it is ideal for protecting narrow areas, creating perfectly straight lines and achieving clean, burr-free finishes.

Made with high-quality paper and a specially formulated adhesive, this tape adheres perfectly to the foam block, while removing easily without leaving any residue.
Its resistance to solvents and paints allows for reliable use with both polyester and epoxy resins.

Flexible and easy to apply, Goldband conforms precisely to surfaces, making it particularly suitable for surfboard manufacturing.

Features :

• Width: 5 mm

• Ideal for fine lines and precision areas

• Reliable adhesion without damaging the surfaces

• Clean removal without residue

The surfboard sanding kit includes everything needed to perform the key sanding steps, from roughing to the finest finishes. Designed for working with foam and resin/fiber laminate surfboards, it is suitable for both amateur shapers and professional workshops.

Thanks to a well-chosen selection of tools and abrasives, this kit allows you to achieve a smooth surface, clean rails, and a high-quality finish before polishing or launching.

SURF BLANK 5'10 F FIsh MILLENNIUM 3/16 darkwood Density : BLUE standard

The WoodKit PRO Mini Simmons was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

M Foam is a cross-linked PVC foam for “High performance” sandwich structures subjected to various static and dynamic loads. This material is compatible with the majority of thermosetting and thermoplastic resins on the market (epoxy, polyester, vinylester, phenolic and certain acrylic resins).

We cut your custom plate...
Customize your dimensions below with a maximum of 218 cm in length and 102 cm in width and we will deliver to you in the desired dimensions!

The perfect mid-length foil surfboard for learning, progressing and having fun, whatever the conditions. Designed for beginners and intermediate levels, this balanced shape offers excellent stability and easy wave starts, in small or soft waves.

We carry out the machining in our latest generation AkuShaper machines and deliver you a preshape on which the rocker, outline, rails and hull shapes are already precisely machined so that all you have left is a simple finishing sanding step by hand!

Designed for the manufacture of shortboard -type surfboards, the Surfblanks 6'4" polyurethane foam blank is an essential reference for demanding shapers.

Thanks to its closed-cell structure, this foam blank offers excellent resistance to dents , preserving the appearance and performance of your board, even after many sessions.

Another signature of the brand: its brilliant white . Surfblanks uses a specific UV brightener that guarantees exceptionally white foam while contributing to a high-quality aesthetic finish.

Download the shape3D file:

Longboard single fin Dolphin 7.5" Dark Volan
Made of fiberglass dark volan and mat finish

Finishing sanding grid (screen) in 230 x 280mm format

Sandscrren is used for finishing rails because its weave allows it to take a rounded shape to adapt to the contours but its back side glued with Velcro also allows it to be used on a Foampad to give its finish to the complete shape.

It is available in grit 60, 80, 120, 180, 240

Receive the complete kit to assemble your wooden surfboard using the "Hollow" method, it includes:
- the framekit (skeleton) of your surfboard
- 2 planed 6mm paulownia boards for the top/bottom skins
- 10 paulownia rods 10x10mm for shaping the rails
- 1 reinforcement to stick to the Nose and Tail of the board
- 1 kg of quick-setting polyurethane glue

Carbon fiber 3K twill 200gr - 125cm width

The PIG is the retro model of the range with a set-back main beam, full belly and 50/50 rails. This retro shape will allow you to practice surfing the old school way!

We carry out the machining in our latest generation Aku Shaper machines and deliver you a pre-shape on which the rocker, outline, rails and hull shapes are already precisely machined so that all you have to do is a simple finishing sanding step by hand!

The BEVEL MID, is a Malibu shape base, with a bevel on the lower part of the rail, which allows the board to be very maneuverable with speed.

We carry out the machining in our latest generation Aku Shaper machines and deliver you a pre-shape on which the rocker, outline, rails and hull shapes are already precisely machined so that all you have to do is a simple finishing sanding step by hand!

The CRAZY TWIN is a compact and playful board, which will offer the sensations of a skateboard in small waves.

We carry out the machining in our latest generation Aku Shaper machines and deliver you a pre-shape on which the rocker, outline, rails and hull shapes are already precisely machined so that all you have to do is a simple finishing sanding step by hand!

The CONFORT FISH SHORTBOARD is comfortable and maneuverable, the everyday board for an intermediate surfer looking for comfort when paddling and catching waves, while maintaining maneuverability.

We carry out the machining in our latest generation Aku Shaper machines and deliver you a pre-shape on which the rocker, outline, rails and hull shapes are already precisely machined so that all you have to do is a simple finishing sanding step by hand!

The SHORTBOARD COMP SQUARE TAIL is the performance board for intermediate to expert surfers who want to optimize their maneuvers in terms of radicality and control.

We carry out the machining on our latest-generation AkuShaper machines and deliver a pre-shaped board with the rocker, outline, rails, and bottom shapes already precisely machined, leaving you with just a simple hand-sanding finish!