MATERIALS

Carbon fiber 3K twill 160gr - 100cm width

Carbon fiber 3K twill 200gr - 100cm width

Receive the complete kit to assemble your wooden surfboard using the "Hollow" method, it includes:
- the framekit (skeleton) of your surfboard
- 2 planed 6mm paulownia boards for the top/bottom skins
- 10 paulownia rods 10x10mm for shaping the rails
- 1 reinforcement to stick to the Nose and Tail of the board
- 1 kg of quick-setting polyurethane glue

Carbon fiber 3K twill 200gr - 125cm width

Recevez le kit complet pour assembler votre planche de surf en bois selon la méthode "Hollow", il comprend:
- le framekit (squelette) de votre planche de surf
- 2 plateaux rabotés en paulownia 6mm pour les peaux dessus/dessous
- 10 baguettes en paulownia 10x10mm pour la mise en forme des rails
- 1 renfort à coller au Nose et Tail de la planche
- 1Kg de colle Polyuréthane à prise rapide

Nous découpons au laser la structure évidée (latte centrale + couples) dans le matériau de votre choix (contreplaqué ou Paulownia)

Téléchargez simplement ci-dessous votre fichier au format DXF ou SHAPE3D
ou optez pour un modèle prédéfini de notre gamme...

Colle à bois polyurétane monocomposant avec prise rapide pour l'assemblage de vos structures Hollow
Disponible en flacon de 500Grs ou 1Kgs

Plateau de Paulownia déligné/raboté en 600mm de largeur et 6mm d'épaisseur pour la réalisation de surf hollow

Paulownia board edged/planed in 600mm width and 25mm thickness for the creation of surfboards, alaia or snowboard.

Paulownia is a very flexible and light wood (260 kg/m3), hydrophobic it does not absorb water.

Available in 2m40 length

Versatile spring clamps for holding Paulownia drumsticks and skins while gluing. Durable steel body with spring designed for heavy-duty use.

2m x 600mm Paulownia - Raboté/Déligné - Planches à assembler

The WoodKit PRO Mini Simmons was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Retro Fish was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Flying Fish was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO 7 Seas was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Dream Catcher was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Spitfire  was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.