MATERIALS

Amber translucent pigment 30 g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

The FCS II Essential plug is designed to offer strength, lightness and reliability

Made from materials resistant to corrosion and mechanical stress, it guarantees excellent support of the fins, even in the most challenging conditions.
Compatible with FCS II fins, it allows for quick assembly without main fixing screws, for simple and efficient launching.

The right/left side is determined by looking at the board from the hull side, viewed from the rear.

POSCA water-based paint marker for all types of surfaces. PC3M - 1.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

MEKP (PMEK) traditional catalytic SPR polyester resin is specially formulated for surfboard manufacturing and repair. It offers excellent versatility for lamination and hot coating , with controlled curing time and a professional-quality finish.

Appreciated by shapers for its ease of application , good transparency and compatibility with polyurethane foams, SPR resin is ideal for both professional workshops and demanding DIY projects.

⚠️ Usage tips

Catalyze at a rate of 2% with a MEKP (PMEK) hardener . Mix well before application.
Work in a ventilated environment and wear personal protective equipment.

Amber translucent pigment 250 g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

The FCS II Essential plug is designed to offer strength, lightness and reliability

Made from materials resistant to corrosion and mechanical stress, it guarantees excellent support of the fins, even in the most challenging conditions.
Compatible with FCS II fins, it allows for quick assembly without main fixing screws, for simple and efficient launching.

The right/left side is determined by looking at the board from the hull side, viewed from the rear.

POSCA water-based paint marker for all types of surfaces. PC3M - 1.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

Yellow Green translucent pigment 30 g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

Plug FCS II vendu à l'unité.
Choississez votre coloris et inclinaison ci dessous.

Le coté droite/gauche se détermine en regardant la planche coté carène, vu de l'arrière.

POSCA water-based paint marker for all types of surfaces. PC3M - 1.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

Yellow Green translucent pigment 250 g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

Plug FCS II vendu à l'unité.
Choississez votre coloris et inclinaison ci dessous.

Le coté droite/gauche se détermine en regardant la planche coté carène, vu de l'arrière.

POSCA water-based paint marker for all types of surfaces. PC3M - 1.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

SPR GLOSS polyester resin is a specific formulation based on paraffin-impregnated styrene , designed for hot coat and gloss coat applications in surfboard manufacturing. It allows for complete surface polymerization , without a tacky effect, and guarantees a smooth, glossy, and durable finish.

Ideal for shapers seeking a professional finish, SPR GLOSS offers excellent surface tension, very good leveling and ease of sanding and polishing, for a high-end final result.

⚠️ Usage tips

Catalyze with a MEKP (PMEK) hardener at a dosage between 2 and 4%. Apply in a uniform layer.
Work in a clean, ventilated and temperature-controlled environment for optimal results.

Scarlet translucent pigment 30 g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

POSCA water-based paint marker for all types of surfaces. PC3M - 1.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

MEKP (PMEK) traditional catalytic SPR polyester resin is specially formulated for surfboard manufacturing and repair. It offers excellent versatility for lamination and hot coating , with controlled curing time and a professional-quality finish.

Appreciated by shapers for its ease of application , good transparency and compatibility with polyurethane foams, SPR resin is ideal for both professional workshops and demanding DIY projects.

⚠️ Usage tips

Catalyze at a rate of 2% with a MEKP (PMEK) hardener . Mix well before application.
Work in a ventilated environment and wear personal protective equipment.

Scarlet translucent pigment 250 g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

POSCA water-based paint marker for all types of surfaces. PC3M - 1.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

Translucent Lemon pigment 30g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

POSCA water-based paint marker for all types of surfaces. PC3M - 1.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

Translucent Lemon pigment 250g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

POSCA water-based paint marker for all types of surfaces. PC3M - 1.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

Résine Epoxy Resoltech 1070 + durcisseur KIT 1,4Kg

Résine Polyester SPR GLOSS - 5L

Blue translucent pigment 30 g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

POSCA water-based paint marker for all types of surfaces. PC3M - 1.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

Résine Epoxy Resoltech 1070 + durcisseur KIT 7Kg

MEKP (PMEK) traditional catalytic SPR polyester resin is specially formulated for surfboard manufacturing and repair. It offers excellent versatility for lamination and hot coating , with controlled curing time and a professional-quality finish.

Appreciated by shapers for its ease of application , good transparency and compatibility with polyurethane foams, SPR resin is ideal for both professional workshops and demanding DIY projects.

⚠️ Usage tips

Catalyze at a rate of 2% with a MEKP (PMEK) hardener . Mix well before application.
Work in a ventilated environment and wear personal protective equipment.

Blue translucent pigment 250 g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

POSCA water-based paint marker for all types of surfaces. PC3M - 1.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

La gamme RÉSOLTECH WWA est destinée aux applications décoratives (bijoux, meubles, tables rivières, œuvres d’art, lunettes, montres) ou industrielles (inclusions pour observation au microscope).

Totalement incolores et transparents, ces systèmes sont compatibles avec la plupart des supports comme le verre, le bois, le béton, le ciment, la pierre, la terre cuite, le métal... Toutes les résines de la gamme peuvent être teintées avec des colorants/pigments compatibles époxy. Il est aussi possible d’incorporer diverses charges (métalliques, poudre de nacre, ...).