MATERIALS

POSCA water-based paint marker for all types of surfaces. PC3M - 1.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

P3 separator film - 100cm width

Fiberglass SHAPERS 6oz - 80cm width

Styrène Parafinné

UV- catalyzed SPR polyester resin is specially designed for the manufacture and finishing of surfboards.
It polymerizes only under exposure to UV rays , offering total control over working time and increased productivity for shapers.

Ideal for lamination and hot coat , this resin guarantees excellent transparency, a glossy finish and easy sanding, while reducing losses related to setting time.

⚠️ Usage tips

Apply the resin away from UV light. Once the lamination is complete, expose the board to sunlight or under a UV lamp to trigger polymerization.
Use personal protective equipment and work in a ventilated area.

Pain de mousse  EON Foam 7'6"MALIBU moulés en France (Bretagne) non latté.

Biomass ça veut dire quoi ?
Fabriqués à partir de polystyrène NEOPS® de KNAUF INDUSTRIES®, le naphta issu du raffinage du pétrole a été remplacé par un naptha végétal issu de la compression des végétaux : élagages publics et privés, rotations agricoles, débroussaillages, feuilles mortes, tontes amenées en déchetterie.
La mousse est également 100% recyclable via le réseau de retraitement Knauf Circular. 

Les billes de polystyrène sont agglomérées dans un moule proche du shape final sous haute pression, permettant une excellente résistance à la compression, une faible absorption d'eau et de résine lors de la stratification et une finition facilitée au ponçage par rapport au polystyrène conventionnel en blocs.

2D Polystyrene Cutting up to 6'6

Yellow Green translucent pigment 250 g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

Plug FCS II vendu à l'unité.
Choississez votre coloris et inclinaison ci dessous.

Le coté droite/gauche se détermine en regardant la planche coté carène, vu de l'arrière.

SURF BLANK 5'10 F Fish MILLENNIUM triples lattes 1x 3/16 darkwood + 2x 1/8 darkwood @ 5'1/4 Density : BLUE standard

The WoodKit PRO 7 Seas was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

M Foam is a cross-linked PVC foam for “High performance” sandwich structures subjected to various static and dynamic loads. This material is compatible with the majority of thermosetting and thermoplastic resins on the market (epoxy, polyester, vinylester, phenolic and certain acrylic resins).

We cut your custom plate...
Customize your dimensions below with a maximum of 218 cm in length and 102 cm in width and we will deliver to you in the desired dimensions!

Fibre de verre SHAPERS 6oz - 105cm largeur

Poignée SUP Renforcée

Pain de Mousse 6'5" Fish XTRAFOAM

Impression aux encres UV sur fibre de verre 125gr/m2
Votre déco est imprimée directement sur de la fibre de verre à stratifier à même le pain de mousse évitant ainsi tout risque de délamination et avec un rendu incroyable. Il vous suffit de joindre un fichier au format vectorisé (.ai, .eps) ou avec une définition de 300dpi.

Nous contacter au 05.35.54.09.72 si besoin d'aide pour la mise en forme du fichier