Root

GLASSING COLORS Pigment CLEAR PINK

POSCA water-based paint marker for all types of surfaces. PC5M - 2.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

MTN 94 400ml - RV-193 Chewing Gum -

SURF BLANK 8'10 MT Mid lenght MILLENNIUM Triple lattes 1x 3/16 darkwood + 2x 1/8 Darkwood @ 6" Density : BLUE standard

The WoodKit PRO Stiletto was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

Longboard single fin Classic 10.25" Natural
Made of fiberglass  mat finish

Creatures Mick Fanning Black Fade Lime

PhixDoctor Sunpowered polyester repair kit
UV cured, contains 2.5oz (75ml) of resin.

GLASSING COLORS Pigment RED

POSCA water-based paint marker for all types of surfaces. PC5M - 2.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

MTN 94 400ml - RV-20 Jaune Fiesta -

SURF BLANK 9'4 MT Longboard MILLENNIUM 1/4 darkwood Density : BLUE standard

The WoodKit PRO Swordfish was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

Longboard single fin Classic 9" Natural
Made of fiberglass  mat finish

PhixDoctor Sunpowered repair kit compatible with polyester and epoxy.
UV cured, contains 4oz (120ml) of resin.

GLASSING COLORS Oxide Red Pigment