Red translucent pigment 250 g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

Green translucent pigment 250 g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

Yellow Green translucent pigment 30 g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

This Hard foam interface is specially designed for Flexpad blocks , offering precise and firm sanding when shaping surfboards.
Its high density allows for optimal control in areas requiring sustained pressure, ideal for roughing and shaping rails and rocker .

The rigid but slightly flexible foam conforms to the curves of the board while ensuring even pressure distribution, for clean and consistent work.

The Velcro fastening system ensures quick and secure attachment to the Flexpad, allowing easy changing of the foam according to the needs of the shape and the type of abrasive used.

SURF BLANK 8'10 MT Mid lenght MILLENNIUM Triple lattes 1x 3/16 darkwood + 2x 1/8 Darkwood @ 6" Density : BLUE standard

SURF BLANK 6'11 F Fish MILLENNIUM  Triple lattes 1x 3/16 darkwood + 2x 1/8 drakwood Density : BLUE standard

SURF BLANK 6'5 F Fish MILLENNIUM 1/8 appelcore blackDensity : BLUE standard

SURF BLANK 6'2 F Fish MILLENNIUM Double lattes  2x 1/8 darkwood @ 1" Density : BLUE standard

SURF BLANK 9'9 Y Longboard MILLENNIUM doble stringers 2 x 3/16 darkwood @ 1" Density : BLUE standard

SURF BLANK 8'10 MT Mid lenght MILLENNIUM 3/16 darkwood Density : BLUE standard

The WoodKit PRO Custom Gather everything you need to make your Hollow surfboard from Paulownia wood and make construction easier with the top/bottom panels already glued in 600mm width.

It includes:

- The skeleton (FrameKit) laser-cut from your shape3D file using CNC technology
- Planed Paulownia panels for the deck/bottom (600mm wide and 6mm thick)
- 12 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Kanaloa was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO The Tanker was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

M Foam is a cross-linked PVC foam for “High performance” sandwich structures subjected to various static and dynamic loads. This material is compatible with the majority of thermosetting and thermoplastic resins on the market (epoxy, polyester, vinylester, phenolic and certain acrylic resins).

We cut your custom plate...
Customize your dimensions below with a maximum of 218 cm in length and 102 cm in width and we will deliver to you in the desired dimensions!

This Downwind Foil SUP was designed for riders looking for pure offshore thrills, even without strong winds. With its elongated shape and generous volume, it allows you to take off early, surf ocean swells, and enjoy long, effortless slides. Ideal for beginners in downwind foiling or intermediate riders looking to progress with confidence.

We carry out the machining on our latest-generation AkuShaper machines and deliver a pre-shaped board with the rocker, outline, rails, and hull shapes already precisely machined, so all you need to do is a simple hand-sanding finish!