Home

The WoodKit PRO Rocket was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Nexpa was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO The Tanker was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO One Mid was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Spitfire  was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Dream Catcher was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO 7 Seas was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Mini Simmons was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Retro Fish was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

The WoodKit PRO Flying Fish was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

Hexcel TV235 Fiberglass 3oz / 86gr - 105cm width

Pain de Mousse XTRAFOAM 9'5" en mousse polyuréthane (PU) pour la réalisation d'une planche de type longboard.

La mousse XTRAFOAM est facile à travailler et permet de réaliser des planches légères.
La latte est en contreplaqué 9mm

Pain de Mousse XTRAFOAM 9'5" en mousse polyuréthane (PU) pour la réalisation d'une planche de type longboard.

La mousse XTRAFOAM est facile à travailler et permet de réaliser des planches légères.
La latte est en contreplaqué 9mm

Pain de Mousse XTRAFOAM 10'3" en mousse polyuréthane (PU) pour la réalisation d'une planche de type longboard.

La mousse XTRAFOAM est facile à travailler et permet de réaliser des planches légères.
La latte est en contreplaqué 9mm

Pain de Mousse XTRAFOAM 10'3" en mousse polyuréthane (PU) pour la réalisation d'une planche de type longboard.

La mousse XTRAFOAM est facile à travailler et permet de réaliser des planches légères.
La latte est en contreplaqué 9mm

Pain de Mousse XTRAFOAM 10'3" en mousse polyuréthane (PU) pour la réalisation d'une planche de type longboard.

La mousse XTRAFOAM est facile à travailler et permet de réaliser des planches légères.
La latte est en contreplaqué 9mm

XTRAFOAM 10'0" polyurethane (PU) foam block for making a gun-style board.

XTRAFOAM foam is easy to work with and allows for the creation of lightweight boards.
The slat is made of 22mm multi-ply plywood

XTRAFOAM 8'7" polyurethane (PU) foam block for making a gun-style board.

XTRAFOAM foam is easy to work with and allows for the creation of lightweight boards.
The slat is made of 16mm multi-ply plywood

Hexcel TV1080 2oz / 48gr Fiberglass - 110cm width

Pain de Mousse 7'3 Gun XTRAFOAM

Pain de Mousse XTRAFOAM 10'3" en mousse polyuréthane (PU) pour la réalisation d'une planche de type longboard.

La mousse XTRAFOAM est facile à travailler et permet de réaliser des planches légères.
La latte est en contreplaqué 9mm

Pain de Mousse XTRAFOAM 9'5" en mousse polyuréthane (PU) pour la réalisation d'une planche de type longboard.

La mousse XTRAFOAM est facile à travailler et permet de réaliser des planches légères.
La latte est en contreplaqué 9mm

Pain de Mousse 8'5" Malibu XTRAFOAM

Pain de Mousse 7'10" Malibu XTRAFOAM

Pain de Mousse 7'2" Malibu XTRAFOAM

Pain de Mousse 6'11" Fish XTRAFOAM

Pain de Mousse 6'5" Fish XTRAFOAM

Pain de Mousse 6'11" Shortboard XTRAFOAM

Pain de Mousse 6'8" Shortboard XTRAFOAM

Pain de Mousse 6'4" Shortboard XTRAFOAM

The FCS / FCS II compatibility kit allows the use of fins equipped with the Dual Tab system (classic FCS) in FCS II generation bodies.

This practical solution offers the possibility of keeping and reusing your classic FCS fins on a board equipped with FCS II plugs, without having to replace your set of fins.

FCS II Dummy Fins are positioning tools specifically designed to facilitate the installation of FCS II fin boxes when manufacturing or repairing a surfboard.

Inserted into the housings before final mounting, these mounting brackets help maintain the housings in the correct orientation and ensure the intended tilt angle during installation. This contributes to precise and consistent alignment of the housings during bonding and lamination.