Home

Hexcel 1184 6oz Fiberglass - 80cm Width

UV-cured SPR polyester resin is specially designed for the manufacture and finishing of surfboards. It only polymerizes under exposure to UV rays , offering total control over working time and increased productivity for shapers.

Ideal for lamination and hot coat , this resin guarantees excellent transparency, a glossy finish and easy sanding, while reducing losses related to setting time.

⚠️ Usage tips

Apply the resin away from UV light. Once the lamination is complete, expose the board to sunlight or under a UV lamp to trigger polymerization.
Use personal protective equipment and work in a ventilated area.

Hexcel 471 6oz Fiberglass - 80cm Width

Hexcel 1266 6oz Fiberglass - 130cm Width

MEKP (PMEK) traditional catalytic SPR polyester resin is specially formulated for surfboard manufacturing and repair. It offers excellent versatility for lamination and hot coating , with controlled curing time and a professional-quality finish.

Appreciated by shapers for its ease of application , good transparency and compatibility with polyurethane foams, SPR resin is ideal for both professional workshops and demanding DIY projects.

⚠️ Usage tips

Catalyze at a rate of 2% with a MEKP (PMEK) hardener . Mix well before application.
Work in a ventilated environment and wear personal protective equipment.

The WoodKit PRO Mini Simmons was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

This foampad made of open-cell foam is designed to offer precision and control when shaping surfboards.
Its honeycomb structure allows for a homogeneous distribution of pressure , guaranteeing regular sanding without creating flat spots or unwanted marks on the foam block.

With its dimensions of 23 × 28 cm , it offers a comfortable working surface, ideal for sanding rails, rocker and curved areas , while remaining manageable and precise.
The foam naturally adapts to the shape of the board, facilitating clean and progressive work.

The Velcro fastening system allows for quick and secure attachment of abrasives, ensuring optimal support during work and easy change of grains according to the shaping stages.

Lightweight, ergonomic and durable, this foampad is an indispensable tool for shapers, from roughing out to finishing.

Hexcel TV1080 2oz / 48gr Fiberglass - 110cm width

The WoodKit PRO Retro Fish was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

Hexcel TV235 Fiberglass 3oz / 86gr - 105cm width

The WoodKit PRO Flying Fish was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

Longboard single fin Dolphin 10.25" Dark Volan
Made of fiberglass dark volan and mat finish

The WoodKit PRO 7 Seas was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

Longboard single fin Dolphin 9" Dark Volan
Made of fiberglass dark volan and mat finish

The WoodKit PRO Dream Catcher was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

Longboard single fin Dolphin 6.5" Dark Volan
Made of fiberglass dark volan and mat finish