Home

FlexPad 200mm Softie

Masque 3M 4255 A2P2

Silmar 249BB polyester resin is an essential reference in the manufacture of surfboards.
Used by many professional shapers, it offers excellent transparency, optimal ease of application and perfect compatibility with PU foams.

Specifically formulated for lamination and hot coat , Silmar 249BB guarantees a smooth, resistant and durable finish, while maintaining excellent stability over time.

⚠️ Usage tips

To be catalyzed at a level of 2% with a MEKP catalyst .
Mix well before application. Use in a ventilated area and wear appropriate protective equipment.

FlexPad 200mm Soft

Masque 3M 7502 A2P3

UV-cured SPR polyester resin is specially designed for the manufacture and finishing of surfboards. It only polymerizes under exposure to UV rays , offering total control over working time and increased productivity for shapers.

Ideal for lamination and hot coat , this resin guarantees excellent transparency, a glossy finish and easy sanding, while reducing losses related to setting time.

⚠️ Usage tips

Apply the resin away from UV light. Once the lamination is complete, expose the board to sunlight or under a UV lamp to trigger polymerization.
Use personal protective equipment and work in a ventilated area.

FlexPad 200mm Medium

Masque 3M intégral 6800

FlexPad 200mm Hard

6035 Dust Cartridges - 3M 7502 Mask

MEKP (PMEK) traditional catalytic SPR polyester resin is specially formulated for surfboard manufacturing and repair. It offers excellent versatility for lamination and hot coating , with controlled curing time and a professional-quality finish.

Appreciated by shapers for its ease of application , good transparency and compatibility with polyurethane foams, SPR resin is ideal for both professional workshops and demanding DIY projects.

⚠️ Usage tips

Catalyze at a rate of 2% with a MEKP (PMEK) hardener . Mix well before application.
Work in a ventilated environment and wear personal protective equipment.

FlexPad 200mm Xtra Hard

This range of trapezoidal gas and vapor filters combines excellent protection, comfort, and balance. Lightweight, low breathing resistance, and well-balanced when mounted on the mask. Provides an excellent field of vision due to its unique trapezoidal shape. The filters can be used on all 3M half and full face masks equipped with a bayonet fitting system, such as the 3M 7500 and 3M 6800. The bayonet system allows the filters to be attached with a click, simplifying installation.

Features

• Filters that protect against: Organic vapors (boiling point > 65°C)
• Standard: EN 141
• Can be combined with a dust filter

Silmar 249BB polyester resin is an essential reference in the manufacture of surfboards.
Used by many professional shapers, it offers excellent transparency, optimal ease of application and perfect compatibility with PU foams.

Specifically formulated for lamination and hot coat , Silmar 249BB guarantees a smooth, resistant and durable finish, while maintaining excellent stability over time.

⚠️ Usage tips

To be catalyzed at a level of 2% with a MEKP catalyst .
Mix well before application. Use in a ventilated area and wear appropriate protective equipment.

This range of trapezoidal gas and vapor filters combines excellent protection, comfort, and balance. Lightweight, low breathing resistance, and well-balanced when mounted on the mask. Provides an excellent field of vision due to its unique trapezoidal shape. The filters can be used on all 3M half and full face masks equipped with a bayonet fitting system, such as the 3M 7500 and 3M 6800. The bayonet system allows the filters to be attached with a click, simplifying installation.

Features

• Filters that protect against: Organic vapors (boiling point > 65 °C), inorganic vapors, acid gases, ammonia and its derivatives
• Standard: EN 141
• Can be combined with a dust filter

The WoodKit PRO Mini Simmons was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.