Home

The WoodKit PRO Flying Fish was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

This range of trapezoidal gas and vapor filters combines excellent protection, comfort, and balance. Lightweight, low breathing resistance, and well-balanced when mounted on the mask. Provides an excellent field of vision due to its unique trapezoidal shape. The filters can be used on all 3M half and full face masks equipped with a bayonet fitting system, such as the 3M 7500 and 3M 6800. The bayonet system allows the filters to be attached with a click, simplifying installation.

Features

• Filters that protect against: Organic vapors (boiling point > 65 °C), inorganic vapors, acid gases, ammonia and its derivatives
• Standard: EN 141
• Can be combined with a dust filter

The FCS / FCS II compatibility kit allows the use of fins equipped with the Dual Tab system (classic FCS) in FCS II generation bodies.

This practical solution offers the possibility of keeping and reusing your classic FCS fins on a board equipped with FCS II plugs, without having to replace your set of fins.

FCS II Dummy Fins are positioning tools specifically designed to facilitate the installation of FCS II fin boxes when manufacturing or repairing a surfboard.

Inserted into the housings before final mounting, these mounting brackets help maintain the housings in the correct orientation and ensure the intended tilt angle during installation. This contributes to precise and consistent alignment of the housings during bonding and lamination.

The Under Glass FCS II copy milling cutter is designed to accurately create the housings for FCS II fin boxes when manufacturing or repairing surfboards.

When used with a compatible router or trimmer, it allows you to work by copying onto a suitable template to obtain precise and regular machining, facilitating the integration of the boxes into the structure of the board.
Its 1/4" (6.35 mm) shaft allows it to be mounted on machines equipped with a clamping collet corresponding to this diameter.

Achieve precise and consistent machining of FCS II fin box housings with this routing template designed for use with a router or trim router equipped with a copy cutter.

This template allows you to faithfully reproduce the shape and dimensions of the locations intended for the FCS II Original boxes, for a clean and neat integration into your surfboard.

FlexPad 200mm Xtra Hard

FlexPad 200mm Hard

FlexPad 200mm Medium

FlexPad 200mm Soft

FlexPad 200mm Softie

FlexPad 150mm xtra hard

FlexPad 150mm hard

FlexPad 150mm medium

FlexPad 150mm Softie

Scotch premium 3M 233+ - 18mm

This range of trapezoidal gas and vapor filters combines excellent protection, comfort, and balance. Lightweight, low breathing resistance, and well-balanced when mounted on the mask. Provides an excellent field of vision due to its unique trapezoidal shape. The filters can be used on all 3M half and full face masks equipped with a bayonet fitting system, such as the 3M 7500 and 3M 6800. The bayonet system allows the filters to be attached with a click, simplifying installation.

Features

• Filters that protect against: Organic vapors (boiling point > 65°C)
• Standard: EN 141
• Can be combined with a dust filter

6035 Dust Cartridges - 3M 7502 Mask

Masque 3M intégral 6800

Masque 3M 7502 A2P3

Masque 3M 4255 A2P2

3M 4251 A1P2 Mask

Plug FCS II vendu à l'unité.
Choississez votre coloris et inclinaison ci dessous.

Le coté droite/gauche se détermine en regardant la planche coté carène, vu de l'arrière.