MATERIALS

The WoodKit PRO 7 Seas was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

POSCA water-based paint marker for all types of surfaces. PC5M - 2.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

The WoodKit PRO Dream Catcher was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

POSCA water-based paint marker for all types of surfaces. PC5M - 2.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

The WoodKit PRO Spitfire  was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

POSCA water-based paint marker for all types of surfaces. PC5M - 2.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

The WoodKit PRO One Mid was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

POSCA water-based paint marker for all types of surfaces. PC8K - 8mm broad chisel tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

POSCA water-based paint marker for all types of surfaces. PC5M - 2.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

The WoodKit PRO The Tanker was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

POSCA water-based paint marker for all types of surfaces. PC8K - 8mm broad chisel tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

POSCA water-based paint marker for all types of surfaces. PC5M - 2.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

The WoodKit PRO Nexpa was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

POSCA water-based paint marker for all types of surfaces. PC8K - 8mm broad chisel tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

POSCA water-based paint marker for all types of surfaces. PC5M - 2.5mm fine conical tip POSCA markers can be used directly on the foam board or once the board is finished with a spray varnish. Odorless, alcohol-free, and solvent-free, and the tip is washable with water or replaceable. See the Posca Instructions and FAQ

The WoodKit PRO Rocket was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.