MATERIALS

The WoodKit PRO Retro Fish was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

Translucent Turquoise Pigment 250g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

The WoodKit PRO Flying Fish was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

Yellow translucent pigment 30 g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

The WoodKit PRO 7 Seas was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

Yellow translucent pigment 250 g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

The WoodKit PRO Dream Catcher was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

Translucent Magenta pigment 30g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

The WoodKit PRO Spitfire  was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

Translucent Magenta Pigment 250g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

The WoodKit PRO One Mid was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

Blue Green translucent pigment 30 g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

The WoodKit PRO The Tanker was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

Blue Green translucent pigment 250 g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.

The WoodKit PRO Nexpa was designed by shaper David Weber and brings together everything you need to make your own Hollow surfboard out of Paulownia wood.

It includes:

- the board's skeleton, laser-cut from Surfply3L (100% Paulownia plywood)
- 8 planed Paulownia boards for the deck/bottom (150mm wide and 4mm thick)
- 10 bendable Paulownia wood strips to form the rails of the board (10x10mm section)
- 5 Paulownia reinforcement blocks for the nose/tail and fin areas.
- Assembly instructions written by David Weber

The kit is manufactured by iPaulownia using paulownia wood sourced from plantations in the Valencia region of Spain. Paulownia is a very lightweight wood (260-280 kg/m³) that is resistant to water, salt, and torsion. It is easy to work with and gives the board an aesthetically pleasing appearance.

Burgundy translucent pigment 30 g from West & Senior .
Designed for coloring polyester and epoxy resins , this high-quality pigment allows for transparent or semi-transparent effects while preserving the depth and gloss of the resin.

Thanks to its high concentration, a small amount of pigment is sufficient to obtain the desired intensity.
The dosage can be adjusted according to the desired effect, ranging from a light translucent tint to a more intense colouring while maintaining a transparent appearance.